resi-linx HD-4001 digi-mod Скачать руководство пользователя

Страница: 18 / 20

HD-4001DM User Guide and Install Manual

Page 18

Analog. Factory Set: Analog.





Audio Output

–

Use the Scroll Up/Down button to select Audio Output. Press the OK

button to enter the Audio Output menu. Use the Scroll Up/Down button to select the Audio

Output option: MP2 (MPEG2 Layer I Audio), AAC, or AC3. Factory default: MP2. Press

the OK button to set.

Some versions of the HDT Encoder will not allow you to select AC3 as an option. Contact

your Distributor if you require an AC3 version of this device.





Closed Caption-

Use the Scroll Up/Down button to select the Closed Caption Menu. Press

the OK button to enter the Closed Caption menu. Enable / Disable Closed Caption control.

Each Encoder will require you to Enable the Closed Caption option if you require Closed

Captioning Support on a particular video output.

NOTE: WHEN USING CLOSED CAPTIONING- USER MUST CONNECT FROM THE

CONTENT SOURCE THE COMPOSITE OUTPUT OR CC OUTPUT SOURCE TO THE

ENCODER'S CVBS INPUT CONNECTOR.





Brightness

– Use the Scroll Up/Down button to select Brightness. Press the OK button to

enter the Brightness menu. Use the Scroll Up/Down button to select the desired Brightness

value (0 to 255) and press the OK button to set. Factory default: 128.





Contrast

– Use the Scroll Up/Down button to select Contrast. Press the OK button to enter

the Contrast menu. Use the Scroll Up/Down button to select the desired Contrast value (0

to 255) and press the OK button to set. Factory default: 128.





Saturation

– Use the Scroll Up/Down button to select Saturation. Press the OK button to

enter the Saturation menu. Use the Scroll Up/Down button to select the desired Saturation

value (0 to 255) and press the OK button to set. Factory default: 128.





Hue

– Use the Scroll Up/Down button to select Hue. Press the OK button to enter the Hue

menu. Use the Scroll Up/Down button to select the desired Hue value (0 to 255) and press

the OK button to set. Factory default: 128.





Back to Main

- Select Back to Main to escape the Encoder Setup Menu.

Network Setup



Reset Network

- Select Reset Network from the Network Setup to Reset the

Network settings.



Back to Main

- Select Back to Main to escape the Encoder Setup Menu.

ASI OutPut

This device may come equipped with an ASI combined output. Connect a BNC cable to the ASI output

connector (75 Ω ) and to your Broadcast capable device.

Содержание HD-4001 digi-mod





















Результаты поиска

Содержание HD-4001 digi-mod

Отзывы:

Похожие инструкции для HD-4001 digi-mod

Бренды по названию

Популярные бренды

resi-linx HD-4001 digi-mod, Руководство пользователя и инструкция по установке

Результаты поиска

Содержание HD-4001 digi-mod

Отзывы:

Похожие инструкции для HD-4001 digi-mod

Бренды по названию

Популярные бренды