Republic Manufacturing RB-SERIES Скачать руководство пользователя страница 68

Страница: 68 / 70

www.republic-mfg.com

800.847.0380

In the Event of a Breakdown

1. Use a lockout/tagout procedure to ensure the blower may be worked on safely.

2. Refer to the troubleshooting section of the manual to determine the cause of the breakdown and the appropriate action to

take.

3. If further assistance is needed, please call Republic Manufacturing at 800-847-0380.

When to Ship the Blower Back to Republic

If you cannot fix or troubleshoot your blower system using this manual then a skilled Republic Manufacturing professional is

required. Please ship your blower back to Republic Manufacturing.

If the bearing housing or tension pulley has broken down, please ship immediately back to Republic Manufacturing.

Disabling, Dismantling, and Scrapping of Blower

1. Disable the blower using the lockout/tagout procedure outlined in the manual.

2. Dismantle the blower by removing the motor and other assemblies as outlined in manual. Refer to parts breakdown if

needed.

3. Most components are aluminum, stainless steel, or zinc-plated mild steel and may be recycled or disposed of as such.

4. Bearing housing and tension pulley seals are rubber, and belts are rubber or urethane.

Warranty Terms and Conditions

Republic Manufacturing warrants all finished Republic Manufacturing products to be free from functional defects in material

and workmanship for a period of twelve (12) months from the date of installation, or no longer than eighteen (18) months from

shipment.

Wear parts such as drive belts, filter elements, hoses and pulleys are not covered by the 12 to 18 month warranty.

DISASSEMBLY OF BLOWER MAY VOID WARRANTY.

To obtain service within the warranty period, first contact your authorized Republic Manufacturing dealer or Republic

Manufacturing Service Department. Republic’s responsibility under this warranty shall be to provide an analysis of the blower,

which will determine course of action. Any product found to be defective within the warranty period will merit either:

A no charge repair of existing blower. Any freight charges will be the purchaser’s responsibility.

A replacement blower*. Any freight charges will be the purchaser’s responsibility.

*This option would be a chargeable replacement until the original blower is received by Republic Manufacturing, and warranty is

approved.

Republic Manufacturing shall not be liable for incidental nor consequential damages resulting from the use of this product. There

are no expressed nor implied warranties, which extend beyond the warranty of merchantability or fitness for a particular purpose

to the equipment and/or its parts and components.

Содержание RB-SERIES







































































Результаты поиска

Содержание RB-SERIES

Отзывы:

Бренды по названию

Популярные бренды

Republic Manufacturing RB-SERIES, Инструкция по установке и эксплуатации

Результаты поиска

Содержание RB-SERIES

Отзывы:

Бренды по названию

Популярные бренды