manualshive.com logo in svg

Republic Manufacturing RB-SERIES, Инструкция по установке и эксплуатации

Поделиться
Скачать
Republic Manufacturing RB-SERIES Скачать руководство пользователя страница 62

www.republic-mfg.com

800.847.0380

62

Recommended Maintenance Schedule for Republic Blowers

Filter Maintenance

(May be performed by untrained personnel)

Filters should be changed as needed to maintain a differential pressure of less than 10 inches (254 mm) of water pressure 
differential.  The dial on your filter change gauge should be in the green zone. Normal change intervals are between every two (2) 
weeks and 90 days depending on the contamination levels in your plant. See Filter Data Reference for additional information.

Replacement Filter Reference

Description

Part No. Max. CFM

Temperature

Micron

Small Paper 

340-1000

880 CFM

Min. Temp. -15°F/Max. Temp. 220°F

Min. Temp. -26.1 C/Max. Temp. 104.4°C

99.9% efficiency to 10 Micron

Large Paper

340-1002

1100 CFM

Min. Temp. -15°F/Max. Temp. 220°F

Min. Temp. -26.1 C/Max. Temp. 104.4°C

99.9% efficiency to 10 Micron

Small Polyester

340-2000

880 CFM

Min. Temp. -15°F/Max. Temp. 220°F

Min. Temp. -26.1 C/Max. Temp. 104.4°C

99+% efficiency to 10 Micron

Large Polyester

340-2002

1100 CFM

Min. Temp. -15°F/Max. Temp. 220°F

Min. Temp. -26.1 C/Max. Temp. 104.4°C

99+% efficiency to 10 Micron

HEPA Filter Maintenance

(May be performed by untrained personnel)
The HEPA filter element should be changed to maintain less than 10 inches (254 mm) of water pressure differential. The dial on 
your filter change gauge should be in the green zone. The change interval is once every six (6) months. See Filter Data Reference 
for additional information.

Replacement Filter Reference

Description

Part No. Max. CFM

Temperature

Micron

Small HEPA

340-3000

800 CFM  @ 1” 

W.C.

Min. Temp. -15°F/Max. Temp. 220°F

Min. Temp. -26.1 C/Max. Temp. 104.4°C

99.9% efficiency to 10 Micron

Large HEPA

340-3001

1000 CFM @ 

1”W.C.

Min. Temp. -15°F/Max. Temp. 220°F

Min. Temp. -26.1 C/Max. Temp. 104.4°C

99.9% efficiency to 10 Micron

Enclosure Filter Maintenance 

(May be performed by untrained personnel)
Replacement Part No. 292-0001 (paper)
This filter is designed to remove large contaminants from entering the inside of your enclosure. If this filter gets dirty, your blower 
could overheat and discharge pressure could be reduced.
Replacement Part No. 292-0002 (metallic)
This filter is designed to remove large contaminants from entering the inside of your enclosure.  It is an oil wetted wire mesh filter. 
Recommended cleaning interval is weekly or as needed in your facility. If this filter gets dirty, your blower could overheat and 
discharge pressure could be reduced.

Cleaning Procedure for Part No. 292-0002

    1.  Blow off contaminants with compressed air.  

    2.  Clean with solvent in a parts washing tank.  

    3.  Spray with a light coating of WD 40 or similar lightweight oil.

Proper pulley alignment is very important.

Содержание RB-SERIES







































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды