Energy storage integrated machine
Installation
-17-
4.3.1 Battery connection
4.3.2 PV connection
Only qualified PV strings under the local electrical safety laws and regulations and
comply with the technical parameters of this manual are allowed to connect to the
iMars series energy storage integrated machines.
The PV string connected to the energy storage integrated machine must adopt the DC
connector configured especially for the energy storage integrated machine, do not use
other connection devices without authorization from our company, otherwise damage
to the device, unstable operation or fire may occur, and our company will not undertake
quality assurance or assume any direct or joint liability thereof.
No
Name
Mark
Detail description
1
Ground
Ground connection
2
On/Off button
POWER
Power on key.
Touch the button to turn it on.
Press for more than 6 seconds and then
release the button to shut down.
3
SOC LED
Shows the battery SOC。
4
Code Switch
COM address code switch
5
RS485 port
RS485
485 communicate port
6
Negative
“
-
”
Battery negative
7
Positive
“
+
”
Battery positive
