24 Port Fast Ethernet Web Management Switch User Manual
¾
In VLAN member-port, select port 1
¾
In destination select option, make sure port 1-10 and port 24 are checked
¾
Click update
¾
In VLAN member-port, select port 2
¾
In destination select option, make sure port 11-20 and port 24 are checked
¾
Click update
Note
: port-based VLAN is generally used in the same switch, if the partition is between
switches, then you may use tag-based VLAN
4.5.2.2. Tag-based
VLAN
Figure 4-22
¾
VLAN No.: PVID, from 1-24
¾
VID: VLAN ID, from 1-4096
¾
Destination port: VLAN member port list
¾
Index: index of VID, the index of each port is one less than port No., the default is
generally used
¾
Load default: restore all VLAN member information to factory settings, in which
situation all ports are in the same VLAN
E.g
. The port 1 of switch A uplink with port 1 of switch B, the port 2-10 of switch A and port
2-10 of switch B can visit each other, the port 11-23 of switch A and port 11-23 of switch B
can visit each other, the port 24 of switch B connect to the server and can be visited by all
ports, refer to the following picture:
38
