24 Port Fast Ethernet Web Management Switch User Manual
¾
Click update
¾
Repeat the above steps for another 9 ports
Method2:
¾
Select port 1 in the port No.
¾
Select speed base is high
¾
Input TX rate is 1
¾
Input RX rate is 1
¾
Click update
¾
Repeat the above steps for another 9 ports
E.g2
. Cancel band restrict of port3
¾
Select port 3 in the port No.
¾
Input TX rate is 0
¾
Input RX rate is 0
¾
Click update
4.4. Redundancy
Redundancy can avoid network meltdown due to network cycle effectively, thus enhance
stability and reduce network failure. It includes RST Parameters, RST Port and Link
aggregation
4.4.1.
RST Parameters
Figure 4-15
¾
STP mode: Two options are offered for the user’s choosing STP algorithm. One is RSTP
(Rapid Spanning Tree Mode) and the other is STP (Spanning Tree Compatible Mode). If
STP is chosen, RSTP will run as a legacy STP. The switch supports RSTP (802.1w) which
is backward compatible with STP (802.1d)
30
