11
Erbas Teknoloji - Reporter MX1144-DGR/B/H User Manual
Responses
:
Process Succeed.
// format & pass is correct
Process Failed!
// format is wrong
5.8.
Change SMS Text Message Contents
You can change Alarm SMS Text Message Contents according to your requirements. Thus, you will be
able to rename Alarm words instead of remembering which input is connected to which equipment.
Note: Message Content is limited to 32 characters. Upper or lower case letters and digits are allowed to
use. Only English letters are accepted according to ASCII.
Content index list is below:
PAT0
: Keep Alive
PAT1…
4
: Input1...4 Low-to-High change alert
PAT9…1
2
: Input1...4 High-to-Low change alert (i.e. Input1 matches with PAT9)
PAT17
: Device Activated (or power restored)
PAT18
: Power Failed (/B versions only)
PAT19
: Low Battery (/B versions only)
Authorization
:
Admins only
Format
:
Password
<space>
PATx:AlarmText#
Examples
:
1111 PAT1:Office Door Opened# // Input1 High alarm content changed
1111 PAT9:Office Door Closed# // Input1 Low alarm content changed
Responses
:
Process Succeed.
// format & pass is correct
Process Failed!
// format is wrong
5.9.
Input Delay Configurations
As factory default, any instant change on input status will trigger an alert. In some cases, you might
want to add a delay on a specific input change event up to 99 seconds. For example, if
you don’t want
to receive alert notifications upon every door open/close event; you may set Input High and/or Input
Low delays to i.e. 60 seconds. Thus, it will not trigger unnecessary alerts and create the alert in case it
left open for at least 1 minute.
Reporter allows you to set these delays on each input individually.
Also, low-to-high and high-to-low events could be set individually as well.
Authorization
:
Admins only
Format
:
Password
<space>
INPHx:Period
Password
<space>
INPLx:Period
Examples
:
1111 INPH2:60
// Input2 High alarm delay is 60 secs
1111 INPL2:0
// Input2 Low alarm delay set to 0
Responses
:
Process Succeed.
// format & pass is correct
Process Failed!
// format is wrong
5.10.
Set Heartbeat (Keep Alive) Interval Period
