12
Erbas Teknoloji - Reporter LX1148-DGR/B/H User Manual
Responses
:
Process Succeed.
// format & pass is correct
Process Failed!
// format is wrong
5.11.
Restore Factory Defaults (RESET)
Resetting the device does not mean any performance change on this device. Reset only deletes all
registered numbers and deletes all configurations & password settings. Thus, device will restore itself
into factory settings.
Authorization
:
Admins only
Format
:
Password
<space>
RESET
Examples
:
1111 RESET
// reset device
Responses
:
Process Succeed.
// format & pass is correct
Process Failed!
// format is wrong
6.
CHECK DEVICE STATUS (STATUS QUERY)
Anytime, while device is external powered, you may send a Status Query SMS to Reporter. It will reply
to you with detailed current I/O status, some settings and GSM signal level information.
Authorization
:
Admins only
Format
:
Password
<space>
STATUS
Examples
:
1111 STATUS
// ask status
Responses
:
INP1:OFF
// INP1 is OFF (LOW)
…
INP4:ON
// INP4 is ON (HIGH)
RLY1:OFF
// RLY1 is OFF (LOW)
…
RLY8:ON
// RLY8 is ON (HIGH)
MOD:1
// call mode is MOD1 (trigger mode)
CALL:OFF
// alert call feature is disabled
KA:24
// keep alive period is 24 hours
SIGNAL:26
// very good GSM signal (between 0..31)
Process Failed!
// format is wrong
7.
CONTROL OUTPUTS (RELAYS)
There are three ways to control your relay outputs remotely:
-
SMS
-
Call Trigger (MOD1)
-
Call & DTMF Dial (MOD2)
7.1.
SMS Method
Authorization
:
Admins and Users
Format
:
Password
<space>
RLYx:ON
(* where x is Relay nr)
Password
<space>
RLYx:OFF
(* where x is Relay nr)
Password
<space>
RLYALL:ON
