11
Erbas Teknoloji - Reporter LX1148-DGR/B/H User Manual
PAT0
: Keep Alive
PAT1…
4
: Input1...4 Low-to-High change alert
PAT9…1
2
: Input1...4 High-to-Low change alert (i.e. Input1 matches with PAT9)
PAT17
: Device Activated (or power restored)
PAT18
: Power Failed (/B versions only)
PAT19
: Low Battery (/B versions only)
Authorization
:
Admins only
Format
:
Password
<space>
PATx:AlarmText#
Examples
:
1111 PAT1:Office Door Opened# // Input1 High alarm content changed
1111 PAT9:Office Door Closed# // Input1 Low alarm content changed
Responses
:
Process Succeed.
// format & pass is correct
Process Failed!
// format is wrong
5.9.
Input Delay Configurations
As factory default, any instant change on input status will trigger an alert. In some cases, you might
want to add a delay on a specific input change event up to 99 seconds. For example, if
you don’t want
to receive alert notifications upon every door open/close event; you may set Input High and/or Input
Low delays to i.e. 60 seconds. Thus, it will not trigger unnecessary alerts and create the alert in case it
left open for at least 1 minute.
Reporter allows you to set these delays on each input individually.
Also, low-to-high and high-to-low events could be set individually as well.
Authorization
:
Admins only
Format
:
Password
<space>
INPHx:Period
Password
<space>
INPLx:Period
Examples
:
1111 INPH2:60
// Input2 High alarm delay is 60 secs
1111 INPL2:0
// Input2 Low alarm delay set to 0
Responses
:
Process Succeed.
// format & pass is correct
Process Failed!
// format is wrong
5.10.
Set Heartbeat (Keep Alive) Interval Period
You may want to see device status automatically under some periods and make sure everything is
working properly. Reporter’s Heartbeat (or keep alive) feature makes this happen. As a factory default
it is set to 0 hours (which means function is disabled). You may set this between 0…999 Hours (more
than 40 days!).
Each keep alive message will include all inputs and outputs current status, mode selection, call
activation, keep alive current interval setting and current GSM CSQ signal level.
Authorization
:
Admins only
Format
:
Password
<space>
KA:Period
Examples
:
1111 KA:24
// Set keep alive for once per day
1111 KA:0
// Disable keep alive messages
