The
Display Output
menu is where you can control how the NVR is going to deliver an image to your
television, screen or monitor. You’ll be able to adjust items such as:
•
screen resolution and position on your monitor
•
the appearance of the menus, and
•
the sensitivity of the USB mouse.
Resolution:
This should be set
as high as possible, but equal
to or lower than the maximum
resolution your screen/monitor
can display. The NVR has many
formats available, in four
different aspect ratios:
Standard (4:3)
- 1024 x 768
Standard (5:4)
-
1280 x 1024, or
1400 x 1050
Widescreen (16:10)
-
1280 x
800, 1440 x 900, or 1680 x 1050
Widescreen (16:9)
-
1280 x 720
(720p), 1600 x 900,
or 1920 x 1080 (1080p)
Note:
Most televisions are 16:9 widescreen. Computer monitors are still commonly produced in multiple
aspect ratios, with 4:3, 16:9 and 16:10 being the most popular aspects.
Standard Monitor via VGA:
Use one of the 4:3 formats to correctly align the NVR’s output on your screen.
Using a widescreen format will “stretch” the image vertically.
Widescreen Monitor via VGA: u
se the widescreen (16:9 or 16:10) format. If your monitor can’t display
those resolutions, you might need to enable letter-boxing on your monitor and use a 4:3 format.
PC Monitor via HDMI:
Choose a format appropriate for your monitor. If it’s a widescreen, use a
widescreen format.
Widescreen Plasma/LCD HDTV via HDMI:
The resolution should be set to the maximum your television
can
process
not
display
. Check your television’s documentation to learn this value. If your television can’t
display 1080p, then use 720p instead.
Transparency:
You can set the NVR’s menus to be partially transparent- in case you need to keep an eye
on things while adjusting settings .
Mouse Sensitivity:
How sensitive the mouse will be. On lowest, large and dramatic arm movements are
required to move the mouse but a few inches onscreen. At the other end of the spectrum, a tiny bump or
knock can send the cursor from one side of the screen to the other. Try somewhere around the lower end
for starters, and then increase it little by little if it’s moving too slowly.
Audio
：
Click the check box to allow display output with Audio .
Device will restart after changing the output parameters ,click OK to continue .
Display -> Output
28
