Here you need to create a
password of the
Admin
account for on-going protection
against unauthorized access,
The default password here is
blank , you must create a new
password to continue .
User Name:
The NVR’s default administration account, which is always called “Admin”. You can’t change
the
Admin
user name.
Password:
The password you’d like to be associated with the
Admin
account. A password can be
between 1 and 8 characters in length, and consists of numbers only (
no letters or symbols
).
The default
password is blank , so you must create new password to continue .
Confirm Password:
Re-enter the password to ensure accuracy.
Level:
This field is greyed out because the
Admin
account always has the highest level of access. There
are two additional access levels available - Guest and Operator.
Enable Password:
Select this if you want to be prompted for the user account’s password when accessing
the main menu.
Display wizard when booting up (checkbox):
Select this if you want the NVR to automatically run the
configuration wizard when it boots up. You can also run the wizard at any time by clicking the
icon on
the NVR menu bar.
DEFAULT PASSWORD INFORMATION
To ensure your privacy, this NVR supports password protection.
The default, all-access username is ‘admin’, the default password is ‘
blank
’.
To ensure your ongoing privacy, you must create a new password to continue. Choose something that you’ll remember,
but that others would be unlikely to guess.
IMPORTANT NOTICE - Do NOT lose or forget your password. To ensure that your NVR has the best security possible,
password recovery has been designed to be a complicated and time consuming process. Only a select number of staff
at the Technical Support Telephone Helpdesk can assist. Password retrieval can take several days, which means you
will NOT be able to access your NVR during this time.
Finishing the Setup Wizard
When you click
Finish
, the NVR will update and save your settings. It may reboot while doing so.
Setup Wizard : Account
16
