REOVIB SWM 4000
Operating Instructions
8
9.0 Saving your own parameter
You can save your own settings of the unit.
Save:
In Menu: Service, Parameter: Code: 143
Set User Params
Load:
In Menu: Service, Parameter: User Params
10.0 Function „only measure“ or enable and disable Parameter/Menus
With this parameter you can protect the saved data sets and unit settings against unauthorised modifying.
In Menu: Service, Parameter: Code: 117
Lock Menues: 1
Enabling parameter / Menus:
In Menu: Service, Parameter: Code: 117
Lock Menues: 0
11.0 Factory setting
With this parameter you can restore the factory settings.
In Menu: Service, Parameter: Factory Settings
12.0 Readout the saved data sets into a PC
At this unit it is possible to load the saved data sets via the USB interface into a PC.
For the coupling you need Microsoft EXCEL
Approaching:
1. Connect measurement device with the data cable to the PC.
2. Switch on the SWM 4000
3. Load data file „SWM4000_usb32.xls“
4. Use button „ receive “. After the sweep the data sets must be displayed.
