Renssi RCM-10, Инструкция по эксплуатации

Страница: 7 / 12

7
2.4.0 POWER TOOL AND USE
1. Do not force the power tool. Use the correct power tool for your application.
The correct power tool will do the job better and safer at the rate for which it
was designed.
2. Do not use the power tool if the switch does not turn it on and off.
Any power tool that cannot be controlled with the switch is dangerous and
must be repaired.
3. Disconnect the plug from the power source and/or the battery packfrom the
power tool before making any adjustments, changing accessories, or storing
power tools.
Such preventive safety measures reduce the risk of starting the power tool
accidentally.
4. Store idle power tools out of reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
5. Maintain power tools.
Check for misalignements or binding of moving parts, breakage of parts and
any other condition that may affect the power tool’s operation. If damaged, have
the power tool repaired before the use. Many accidents are caused by poorly
maintained
power tools.
6. Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting edges are less likely to
bind and are easier to control.
7. Use the power tool, accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work to be
performed.
Use the power tool for operations different from those intented could result in
hazardous situation.
ATTENTION!
Have your power tool serviced by a qualified repair person using only
identical replacement parts.