Renssi RCM-10, Инструкция по эксплуатации

Страница: 8 / 12

8
3. OPERATING THE RCM-10
WARNING!
Improper use of the machine can cause serious damage.
1. Use the Renssi® equipment always on a solid surface to prevent equipment from falling.
2. Make sure the RCM-10 unit is unplugged before making any adjustments.
3. Choose the desired rotation direction from the drill.
4. Do NOT use the hammer setting, always make sure that the drill has been set to DRILL setting.
5. Adjust the desired speed from the drill speed control.
6. Lock the trigger by pulling the trigger and pushing the button next to it.
7. Plug the RCM-10 unit to power outlet.
8. Keep a firm grip on the cable and set your body so that working position is as natural as
possible. Always make sure that you do not need to change your grip during operation.
9. Never place the rotating equipment near your arm.
Equipment can cause the cable to swing around which can lead to serious injuries.
10. Start the machine by pressing the foot pedal.
11. The machine stops when you take your foot off the pedal.
12. If the machine is getting hot during your job, you will need to turn it off to let it cool down
before continuing.