Renson Endura Twist, Руководство по сборке

Страница: 62 / 92

62
Endura
®
Twist
en
After the Endura
®
Twist has been screwed securely in place:
2 • For ‘airflow upwards’ type:
With the ‘airflow upwards’ type you CANNOT anchor upwards, so the Endura
®
Twist must
always be anchored with dowels (see 4.1.1).
B. Pre-drilling directly into the aluminium upper profile:
If there’s no drilling near the fan modules, you can drill directly into the aluminium upper profile.
In that case, always drill on the marked screwing line.
Follow the intervals as indicated above.
Close the maintenance profile
of the Endura
®
Twist.
Please do not remove the
protective cardboard until
the Endura
®
Twist is put into
service.