EN
69
• Exposure to radio waves: the TouchDisplay contains a radio transmitter and receiver.
When activated, the TouchDisplay transmits and receives radio waves through the
antenna.
• Do not install the TouchDisplay in rooms where it can be exposed to the following
conditions:
∙ A greasy atmosphere
∙ Corrosive or flammable gasses, fluids or vapours
∙ Room temperatures above 40°C or lower than -5°C.
∙ Relative humidity higher than 90%
∙ Areas where it could be exposed to water
Never submerge the TouchDisplay in water.
• Always take the following safety regulations into consideration when
installing
the
TouchDisplay. Non-compliance can result in damaging the appliance or in personal injury.
RENSON
®
cannot be held accountable in such situations.
∙ Make sure that the electric power supply is 230V, 1 phase, 50Hz.
∙ The installation has to be performed in accordance with the general and local
construction safety and installation regulations.
∙ The appliance needs to be installed in a way that prevents accidental contact. This
means that under normal circumstances nobody should be able to come in contact with
the live components.
