Renovo Digiwatts RN3000US, Руководство по установке

Страница: 29 / 54

Installation Guide RN3000US Apr 2013
28
Mounting the expansion screws
:
At least Three fasteners are required to secure the wall mounting bracket to a
wall: Two fasteners along the top of bracket using the center holes on each side
and a third fastener at the centerline of the bottom of the bracket. Ensure that all
fasteners are well secured.
4.3.2 Mounting the Digiwatts Unit to the Bracket
Use the following procedure to mount the Digiwatts unit once wall bracket is
secured to the wall.
1) Carefully hook the slots on the rear of the Digiwatts case onto
corresponding vertical tabs of the wall bracket.
Figure 4-5 Mounting the Inverter to Bracket
WARNING!
The Digiwatts unit weighs up to 23kg. To avoid injury, be sure to use
proper lifting techniques and secure the help of someone to assist in the
unpacking and installation of the inverter.
2) Secure the bottom tabs protruding from the bottom of the Digiwatts units to
the bracket using M6 machine screw and a lock. (The lock is not in the
scope of delivery. The user should obtain a lock when it is necessary for