There is on year guarantee on possible errors from the factory (the bill must be presented)
The guarantee does not cover freight to and from RENO or a RENO representative.
Further more the guarantee does not cover:
- frost damages
- damages which arise because of improper handling of the machine
- normal wear parts like hoses, snap couplings, outside valves, nozzles, cables and burnt out engines.
35
6.0 Error finding and correction
Error
Cause
Repair
The machine will not start
Power not connected
Check the electrical connection.
Broken fuse
Change fuse
Defect Cables
Repair the cables
The machine is frozen
Heat up the machine.
No pressure on the pump/
The cleaning liquid jar is empty
Close the liquid valve.
the machine does not run
when the liquid valve is open.
smooth
A wrong nozzle has been fitted -
Replace the nozzle
the nozzle is too large.
The pump gasket has a defect.
Replace the gasket
There is dirt in the pump valves.
Remove the dirt
The pressure regulating valve is
Please adjust it
wrongly adjusted.
The water tap cannot supply
Let the machine suck from a
enough water.
filled jar or tank.
The machine will not reach
The high pressure nozzle is
Turn off the system - turn it on
its working pressure when
blocked or there is dirt in the
again by opening the spray gun.
the spray gun is open.
by-pass valve.
Repeat the procedure with the
spray gun closed. If this doesn’t
help, the by-pass valve should be
dismounted and the extraneous
matter removed.
The machine continuously
The high pressure cleaner is
Dismount the nozzle and remove
starts and stops while the
partly blocked.
the extraneous matter.
spray gun remains opened.
The machine only works with There is dirt in the valves.
Remove the dirt and check if the
the max. pressure and high
flap is moveable and fits tightly.
pressure hose vibrations.
Valves are broken.
Replace valves.
The machine does not suck
The machine has not been set at
Make sure that the high pressure
chemicals
a low pressure or the non-return
nozzle is not blocked.
valve of the injector is blocked.
Clean the water filter and make
sure that there is no dirt in any of
the valves.
Dismount the by-pass valve and
remove the extraneous matters if
any. Remount and if the machine
does not function satisfactory -
call for technical assistance.
7.0 Warranty stipulations
