07
NOTE
Do not use this sensor with Lithium batteries.
The Rover boost terminals are secured not only by tightening the cable entry hatch, but also
by utilizing the removable cable housing to secure the incoming and outgoing connections.
Mounting Screws for the Input/output Terminals
The RCM-BT2 is a great addition to any Renogy charge controller
with an RS485 port. Pair the controller to the Renogy DC Home App
to monitor your system using a smart device like a cell phone or
tablet. Set custom charging parameters using User Mode and
monitor your system in real time.
Renogy BT-2 Bluetooth Module (Model: RCM-BT2)
The RTSCC measures the temperature at the battery bank and uses
this data for very accurate temperature compensation. The sensor is
supplied with a 9.8 ft cable length that connects to the charge
controller. Simply connect the cable to the appropriate slot using the
green connector and place the sensor on top or on the side of the
battery bank and it will immediately start working.
Remote Temperature Sensor (Model: RTSCC)
The RVSCC provides users with more accurate battery charging
giving you peace of mind that the charge controller is operating as
effectively as it should. On certain applications with long line runs,
there can be a difference between the voltage measured at an MPPT
solar charger’s terminals and that measured at the battery terminals.
The RVSCC is the perfect solution by providing a more accurate
battery voltage to the controller and allowing it to adjust the charging
stage more precisely resulting in overall extension of your battery
life.
Renogy Voltage Sensor (Model: RVSCC)
Included Components
Optional Components
