Note: All analog inputs and outputs comply with AES Standard 48-2005 on interconnecting, grounding and shielding.
Sensitivity:
Freq. Range:
Max SPL:
Horiz. Dispersion:
Vert. Opening Angles:
Aiming Angle:
Typical Throw:
Beam Control:
№. Transducers
- Each Module:
№. Amp. Channels:
Dimensions:
Weight:
Hardware:
Enclosure:
Input:
Controls (Rear Mounted):
Computer Controls:
Status Indicators:
Power Connector:
Finish:
DSP/AMPLIFIER
Type:
Power Rating:
Freq. Range:
THD Distortion:
Hum & Noise:
Power Required:
1.0 V (for rated power output)
80 Hz to 20 kHz
ICL-F: 102 dB pgm, 105 dB peak @ 100 Ft. (30.5 m)
ICL-F-DUAL: 105 dB pgm, 108 dB peak
(3-octave bandwidth centered at 2 kHz)
150° up to 3 kHz; 120° above 3 kHz
ICL-F: 20°, 25° and 30°
ICL-F-DUAL: 10°, 15° and 20°
Adjustable from -30° to +30°
ICL-F: 80 Ft. (25 meters)
ICL-F-DUAL: 160 Ft. (50 meters)
ICL-F: effective down to 800 Hz
ICL-F-DUAL: 400 Hz when stacked
Five 6.5-inch cone transducers with neodymium magnets
Three 1-inch HF titanium nitride compression drivers
8 per module
ICL-F: 48” H x 8” W x 7” D (121.5 cm x 20 cm x 17.8 cm)
ICL-F-DUAL: 95” H x 8” W x 7” D (241.5 cm x 20 cm x 17.8 cm)
ICL-F: 61 Lbs (27.7 Kg)
ICL-F-DUAL: 122 Lbs (55.4 Kg)
Attachment points and hinge kits
Finnish Birch with perforated steel grille
Analog Audio: Looping Phoenix 3-pin connectors (looping 3-in, 3-out)
Push-To-Reset circuit breaker
Gain, 8-Band Parametric EQ and Rolloff Filters
Power, Signal
IEC power connector
Standard finish: white paint
Optional finishes: black and custom color paint,
Weather resistant
8-channel, Class D amplifier/DSP processor
100 Watts RMS per channel, 150 Watts Burst
+ 3, - 3 dB, 80 Hz to 20 kHz
< 0.05% typical
<100 dB (A weighted)
Universal 90/260 VAC, 50/60Hz.
24 VA Idle; 500 VA @ rated output per module
(250 ma Idle, 4.2 Amps @ RPO at 120 V per module)
Technical Specifications
IC Live Users Manual, ICL-F & ICL-F-DUAL
41
