50
Operating Instructions
English
• Button BND/ENT (10)
With this button you can select the band range of the radio unit. There are 3 FM ranges:
FM1 > FM2 > FM3
On each of the three band ranges, 6 stations can be stored on the station button 1-6 (4).
• Buttons
and
(11)
With these buttons the receiving frequency can be changed to adjust stations in radio operation.
Briefly pressing a button starts the automatic station search. The auto-scan only stops at the next station that can
be received well.
By pressing a button longer, you activate manual station scan. The display shows MANUAL. In this mode, the
frequency is changed until you release the corresponding button again. Brief presses of this button changes the
frequency step by step.
If buttons are not pressed for a longer period of time, the devices switches back to automatic station
search. The display shows AUTO.
• A/PS button (12)
If you press this button shortly, the stations stored on the station buttons 1-6 (4) are played for 5 seconds each. To
stop the auto-scan, press the button again.
When you keep the button pressed, all the stations that can be received well are stored on the station
buttons 1-6 (4).
After this procedure, the stored stations are played fro 5 seconds each, as described above.
• SCN button (13)
This button starts the auto-scan.
When a station has been found, it is played for 5 seconds and then the auto-scan is continued.
Press the button again to stop the auto-scan to listen to the currently played station.
