9.2 Optical
The remote control LEDs show the alarm control centre status.
LED lit
ON:
OFF:
Flashes:
ZONES
(1 to 8)
Loop is open (error).
The loop must be
checked
Loop is closed and in
order
Flashing quickly:
Loop has been activated
Flashes quickly at intervals:
Loop has been activated and the alarm
control centre is currently disarmed.
Flashing slowly:
Loop has been deactivated
EXIT/ARMED
The alarm system is
armed.
The alarm system is
disarmed.
The alarm system is currently in the
exit delay period.
AC POWER
Indicates that the
power supply is
correctly attached
and supplied.
The power supply is not connected or
incorrectly connected, the alarm con-
trol centre is currently using battery
power.
The LED begins to flash approx. 20-30
seconds after the power is cut or beco-
mes incorrect.
Alternating flashing with “BATTERY”-
LED:
Rechargeable battery charging is acti-
vated and the battery is being charged.
BATTERY
Error in battery
Battery function correct Rechargeable battery is checked
Alternating flashing with “BATTERY”-
LED:
Rechargeable battery charging is acti-
vated and the battery is being charged.
PROGRAM
The alarm control
centre is in pro-
gramming mode.
Normal status
ARM
PROHIBITED
The loop has an er-
ror while the alarm
is armed.
- Loop monitoring is
deactivated
- Loop function correct
The alarm control centre
could not be
armed, as a loop has an error.
DIALING
Telephone in dual
tone multifrequency
(DTMF).
No dialling telephone
line functioning cor-
rectly
Telephone in pulse dialling mode (PD).
Flashing constantly: The telephone
line check was negative (check the
telephone line)
RECORDING
Voice message is
being recorded
No recording of voice
message
107