47
Logging in by entering the network key (if the Wi-Fi router has no WPS function)
• In the next screen, select “Add AP (Scan)” and confirm your entry again as described above.
•
The radio now searches for all receivable Wi-Fi routers in the vicinity and lists them.
• Select the desired Wi-Fi router and confirm your entry.
•
Enter the network key of your Wi-Fi router. Use either the numeric keypad (14) on the remote control or turn the
rotary knob (7) to select the required digits and characters.
•
When the desired character appears, press the rotary knob (7) or the OK button (26) on the remote control to be
able to enter the next character.
•
Press the button (4) or the corresponding arrow button (16) on the remote control to delete the last character
entered.
When entering the password, please note that it is case-sensitive.
• Once all characters have been entered, confirm the network key by pressing and holding down the rotary knob (7)
or the OK button (26) on the remote control. The radio will be connected to the network and revert to the main menu.
Display after successful connection
•
If the connection has been established successfully, the following message will appear:
Association complete
•
The reception quality is shown in the top left corner of the display. The more bars are displayed, the better the
connection to the network.
