III_Operating VisualTable
- 16 -
Auto Capture
2. Operating the hardware
Both the hardware and the software program menu can be used for image capture.
In the event of
successive scanning of the book, use the software menu panel
“Main menu panel”. (Refer to III. “5.
Creating an eBook
” for more detail.)
Hardware key pad
<Direction of the Book complying with the initial setting>
1) Basic functions
- POWER : for supply of power: the equipment begins to beep when the program is not executed or
the cable is not connected properly.
- AUTO
: captures and saves pages on both sides alternately.
- LEFT
: shows the left page of the book on the screen
- RIGHT
: shows the right page of the book on the screen
- CAPTURE
: captures the current image and save it.
2) Special functions
-
Freeze-screen mode : To freeze a captured image on the screen.
3)
When Auto Save is checked in the Creating eBook program,
- L : Click of
”L” button captures and saves the left side.
- R : Click of
“R” button captures and saves the right side.
Buttons on the software menu panel
