21
• Consult an expert if you are unsure as to the function, safety or connection of the product.
• Never operate the device unattended.
• Only operate the device in moderate climates, never in tropical climates.
• Do not leave any packing material unattended. It may become a dangerous toy for children.
• In commercial institutions, the accident prevention regulations of the Employer’s Liability Insurance As-
sociation for Electrical Systems and Operating Materials are to be observed.
• If you are not sure of the correct connection or if there are any questions that are not covered by the
operating instructions, do not hesitate to contact our technical support or another specialist.
7. Installation
Assembly and installation of the device must be carried out by a specialist familiar with the hazards
and the relevant regulations. Maintenance, operation and commissioning of this device must only
be carried out by qualified persons.
When choosing a location for your device, make sure to avoid impact, vibration, dust, hot and cold
temperatures and dampness. When operating a fog machine, ensure that the UV LED effect light is
not directly exposed to the fog jet. Furthermore, no powerful transformers or motors must be used
close to the device.
The effect light must only be operated at a maximum ambient temperature of 40 °C.
Never cover the device. Make sure when mounting with other equipment that there is sufficient
ventilation. Maintain a sufficient distance to other devices and walls. Never install the effect light
in direct proximity of heat sources. Do not point any strong spotlights or light sources towards the
device. This may cause overheating (danger of fire!).
Do not drill or screw additional screws into the casing in order to fasten the device. This may
expose dangerous voltage to touch.
The device must be mounted out of normal reach.
