Renkforce 1359882, Руководство по эксплуатации, Страница: 76 / 240

76
9. Signal Sounds and LED Displays
The signal sounds (beeps) and the LED (1) at the upper left of the code lock display the following
functions/operating conditions:
Operating mode/status Beeps (*) LED
Programming mode is active --- LED is permanently lit
Confirmation at push of a button 1x brief beep 1x brief flash
User code or transponder correct 2x brief beeps 2x brief flashes
User code or transponder incorrect;
programming taking too long
5x brief beeps 5x brief flashes
Activation delay for input of the
DAP code
Brief beeps for 1 minute Brief flashes for 1 minute
Activation of output #1 1x long beep (**) ---
Code lock ready (waiting for input of
an access code or a transponder)
--- LED flashes 1x per second (***)
Reset; deleting all user codes --- Quick flashing
for up to 2.5 minutes
User code (or transponder) already in
the memory
1x long beep ---
Connection to external decoder
defective
1x brief beep
every 5 seconds
---
Data of the integrated real-time clock
defective or lost after power outage
3x brief beeps
every 5 seconds
(*) The signal sounds can be switched on or off via programming code 71.
(**) The signal sound can be switched on or off via programming code 72.
(***) The LED signal can be switched on or off via programming code 73.
The left LED (1) is lit red when output #1 is locked.
The right LED (2) is lit green when output #1 is active.