8
Original instructions
9 Parts list
9.1 Included in the box
9.2 Not included / required tools
Item
Description
5 mm torque
wrench
To tighten extrusion and
readhead mounting screws
1.5 mm hex key
Air bung removal (only if air
purge is required)
5 mm hex key
For securing of readhead
4 mm hex key
For locking of mounting aid
M6 screws
2 × M6 × 1.0 screws length
≥ 35 mm for mounting
readhead
M6 × 1.0 screws length
≥ 20 mm for mounting
extrusion to machine bed
(see table in
for required
quantity)
Item
Description
FORTiS-S FS
encoder unit
The FORTiS-S FS enclosed
encoder system
37 mm readhead
setting shim
Plastic shim to be used as an
installation aid
Air connection
fitting
To enable connection to one of
the encoder air purge inlets
Cable connection
wrench
Used for securely connecting
the encoder cable to the
readhead
Alignment
brackets
2 × brackets secure the
readhead during transit, and
set the correct readhead
alignment during installation.
IMPORTANT:
Retain until
installation is complete.
FORTiS-S FS
quality inspection
certificate
Certifies specific encoder
performance and provides
traceability
Yellow Functional
Safety card
Shows the web address for
accessing the installation
guide.