Renishaw ACR2, Руководство по установке

Страница: 37 / 59

EN - Warnings
SAFETY NOTE:
Each ACR2 port contains spring-loaded components which cause pinch hazards if covers are removed.
Do not dismantle ACR2 ports or remove them from their mounting plates.
Return defective units to an authorised Renishaw Customer Service Centre.
Pinch hazards exist between moving parts and between moving and static parts. Do not hold any part of the autochange system during
movements or during automatic probe changes.
Beware of unexpected movement. The user should remain outside of the full working envelope of probe head / extension / probe
combinations.
In all applications involving the use of machine tools or CMMs, eye protection is recommended.
There are no user serviceable parts inside Renishaw ACR2 units. Return defective units to an authorised Renishaw Customer Service Centre.
For instructions regarding the safe cleaning of Renishaw products, refer to the MAINTENANCE section of the relevant product documentation.
Refer to the machine supplier's operating instructions.
It is the machine supplier's responsibility to ensure that the user is made aware of any hazards involved in operation, including those
mentioned in Renishaw product documentation, and to ensure that adequate guards and safety interlocks are provided.
Under certain circumstances the probe signal may falsely indicate a probe seated condition. Do not rely on probe signals to stop machine
movement.
The expected method of providing an emergency stop for Renishaw products is to remove power.
ACR2 installation guide
www.renishaw.com
Issued 09 2020
37