Renfert SIMPLEX 3D-Filament-Drucker, Настройка

Страница: 30 / 166

en
5 Getting started
The following chapters describe the workflow that is required for initial startup in order to print an object
that is provided on the supplied USB flash drive.
A prerequisite is the assembly of the printer as described above�
In addition, all of the following steps must be carried out in the order described�
The first steps include:
• Basic settings in the SETTINGS menu
-Setting the language
-Setting the temperature unit
- Connecting the printer with a Wi-Fi network
• Leveling the print bed
• Moving the print head manually
• Loading the filament
- Selecting a filament
-Heating the print head
- Drawing in the filament
- Extruding the filament manually
• Calibrating the filament sensor (FMS)
• Loading the model from a USB flash drive
• 3D printing
Additional setting and control options offered by the printer are described in subsequent chapters.
Note on using the menu:
Use the lower left arrow to go back one page, exit a setting, cancel an operation, or return to
the main menu.
5.1 Setting the language
A video on this topic is provided under the following link
www.renfert.com/simplex-2-en and via the QR code shown.
⇒
Select the SETTINGS menu. �
⇒ Use the right arrow to go to page 2 (as shown here in the image).
⇒
Press the button with the language icon �
⇒
Use the arrows / to select the required language�
⇒ Confirm your selection with OK.
⇒
Press the lower left arrow until you are back in the main menu�
Fig. 10
Fig. 11
- 10 -