Renfert SIMPLEX 3D-Filament-Drucker, Настройка

Страница: 28 / 166

en
4.2 Printer assembly
4.2.1 Installing the filament spool holder
⇒
Remove the screw (31) on the top rear using the Allen key pro -
vided�
⇒
Secure the filament spool holder (7) with the screw in this posi -
tion�
4.2.2 Installing the filament sensor (FMS)
⇒
Remove the screw (30) on the top rear using the Allen key pro -
vided�
⇒ Secure the FMS (9) with the screw in this position.
⇒ Plug the FMS connection cable into the rear of the unit (14).
4.2.3 Installing the filament guiding tube
⇒
Insert one end of the filament guiding tube (2) into the FMS (9)
from above�
⇒
From above, insert the other end into the opening on the front
of the extruder (10).
4.2.4 Attaching the door
⇒ Hold the door at right angles to the unit on the hinge bolts�
⇒
Lower the door until the hinges thread into both hinge bolts�
⇒
Close the door�
Fig. 2
31
7
Fig. 3
30
9
14
Fig. 4
Fig. 5
10
2
9
- 8 -