Renfert basic quattro IS, Инструкция по эксплуатации

Страница: 13 / 52

5.4 View Port Replacement
Please refer to the installation instructions provided
with the new pane (insert no. 21-9811).
5.5 Sandblasting Hose
Replacement
1. Disconnect the sandblasting unit from the com-
pressed air supply (Fig. 5,4,3).
2. Refer to insert no. 21-9162 for the installation
instructions.
5.6 Fluorescent Tube
Replacement
1. Pull the fl uorescent tube horizontally out of its
socket (Fig. 10).
2. Remove the cover (Fig. 9)
3. If possible, vacuum out the socket.
4. Push the cover onto the new fl uorescent tube
(Fig. 9).
5. Insert the new fl uorescent tube horizontally into
the socket (Fig. 10).
Please use only Renfert original replacement fl uore-
scent tube sets (no. 92900-0002), Osram Dulux S/E
11W / 21-840, Philips PL-S 11W / 840 / 4P, or Sylva-
nia CF-S 11W / 840 / fl uorescent tubes.
>>> Please observe the safety instructions
(Sec. 3)!
6. Spare Parts
Please refer to the enclosed spare parts list for all
replacement parts.
7. Warranty
Provided the unit is properly used, Renfert warrants
all parts of the
basic quattro IS
for a period of 3 ye-
ars . In case of any claims for warranty original dea-
lers‘ invoice is required. Components subject to na-
tural wear (e.g., blasting nozzles, hoses, fl uorescent
tubes, hose connections, view panes, fi lter materials,
etc.) are excluded from this warranty. The warranty
is voided in case of improper use; failure to observe
the operating, cleaning, maintenance, and connection
instructions; in case of independent repairs or repairs
by unauthorized personnel; if spare parts from other
manufacturers are employed, or; in case of unusual
infl uences or infl uences not in compliance with the
utilization instructions. Warranty service shall not
extend the original warranty.
8. Technical Specifi cations
Working pressure: 1 - 6 bar [14.5 - 87 psi]
Connecting pressure, external:
5 - 8 bar [72.5 - 116 psi]
Air consumption: 120 l/min. at 6 bar [87 psi]
Voltage: 230/240 V, 50/60 Hz
90-120 V, 50/60 Hz
Lamp power: 11 W
Lamp power consumption: 12.3 W (230/240 V)
9 W (90-120 V)
Cable length: 2 m [78,74 inch]
Ø hose connection: interior: 4 mm [0,16 inch]
exterior: 6 mm [0,24 inch]
Ø size of pipe union for external extraction unit:
interior: 35 mm [1,38 inch]
exterior: 40 mm [1,58 inch]
Dimensions 4-tank version (WxHxD):
425 x 305 x 560 mm
[16.74 x 12.02 x 22.06 inch]
Blasting chamber volume: 21 l
Tank capacity: 1000 ml each
Weight 2-tank version (empty): approx. 12 kg
Noise level according to DIN 45635-01-KL3:
< 72dB(A)
9. Shipping Notes
• Empty all sandblasting tanks.
• Request a Renfert shipping box
(Tel.: +49 7731 8208-61).
• If a Renfert shipping box is not used, always di-
sassemble any additional tanks (otherwise we can
assume no liability for shipping damage).
The return form can be downloaded from the „Advice“
section on the Renfert website at www.renfert.com.
10. Standard Delivery
1 basic quattro IS
1 Foot switch
1 Connection set
1 Fluorescent tube, with lamp cover
1 Accessories set
2 Abrasive samples
1 Set of Operating Instructions, with attachment
1 Spare parts list
11. Delivery Versions
No. 2955-0000 basic quattro IS basic unit, 2 tanks, basic quattro IS basic quattro IS
230/240 V, 50-60 Hz
1 x 25-70 µm + 1 x 70-250 µm
No. 2955-1000 basic quattro IS basic unit, 2 tanks, basic quattro IS basic quattro IS
90-120 V, 50-60 Hz
1 x 25-70 µm + 1 x 70-250 µm
12. Accessories
Additional tanks
No. 2955-0050 25-70 µm Right / blue
No. 2955-0051 25-70 µm Left / red
No. 2955-0250 70-250 µm Right / blue
No. 2955-0251 70-250 µm Left / red
Protective mesh
No. 2960-0003 Protective mesh for view port