Renesas SDI Emulator System M32100T-EZ-E, Руководство пользователя

Страница: 13 / 44

( 11 / 42 )
IMPORTANT
Notes on Target System:
• The power to the MCU can be turned off and back on again during target program execution.
However, because the emulator makes various settings on the MCU after it is powered back on
again, it takes a little longer time than when not using the emulator before the MCU can start running
the program after being powered up again.
• In systems where the power is frequently turned off and back on again, the program may not operate
normally.
• If the power to the MCU is turned off while the program remains idle, an error results.
• The software breaks that had been set before the power was turned off have no effect when the
power is back on again, so that no software break occurs.