SMARC EVK of RZ/G2L, RZ/G2LC, RZ/G2UL, RZ/V2L, and RZ/Five
Start-up Guide
R01US0556EJ0102 Rev.1.02
Page 15 of 37
Jun. 17, 2022
Send the data of “fip-smarc-rzv2l_pmic.srec” from terminal software after the message “please send !” is shown.
After successfully download the binary, messages like below are shown on the terminal.
SPI Data Clear(H'FF) Check :H'00000000-0000FFFF Erasing..Erase Completed
SAVE SPI-FLASH.......
======= Qspi Save Information =================
SpiFlashMemory Stat Address : H'0001D200
SpiFlashMemory End Address : H'000CC73F
===========================================================
SPI Data Clear(H'FF) Check : H'00000000-0000FFFF,Clear OK?(y/n)
In case a message to prompt to clear data like above, please enter “y”.
After writing two loader files normally, turn off the power of the board by changing the SW11.
Table 4. Address for sending each loader binary file
RZ/G2L Evaluation Board Kit PMIC version
File name
Address to load to RAM
Address to save to ROM
bl2_bp-smarc-rzg2l_pmic.srec
11E00
00000
fip-smarc-rzg2l_pmic.srec
00000
1D200
RZ/G2LC Evaluation Board Kit
File name
Address to load to RAM
Address to save to ROM
bl2_bp-smarc-rzg2lc.srec
11E00
00000
fip-smarc-rzg2lc.srec
00000
1D200
RZ/G2UL Evaluation Board Kit
File name
Address to load to RAM
Address to save to ROM
bl2_bp-smarc-rzg2ul.srec
11E00
00000
fip-smarc-rzg2ul.srec
00000
1D200
RZ/V2L Evaluation Board Kit PMIC version
File name
Address to load to RAM
Address to save to ROM
bl2_bp-smarc-rzv2l_pmic.srec
11E00
00000
fip-smarc-rzv2l_pmic.srec
00000
1D200
RZ/Five Evaluation Board Kit
File name
Address to load to RAM
Address to save to ROM
spl-smarc-rzfive.srec
11E00
00000
fit-smarc-rzfive.srec
00000
20000
