Renesas RX71M, Руководство пользователя, Страница: 19 / 72

RSK+RX71M 5. User Circuitry
R20UT3217EG0100 Rev. 1.00 Page 19 of 71
Jan 23, 2015
5.6 Pmod™
A Pmod™ Compatible debug LCD module is supplied with the RSK+ board, and should be connected to the
PMOD1 header.
Care should be taken when installing the LCD module to ensure pins are not bent or damaged. The LCD module is
vulnerable to electrostatic discharge (ESD); therefore appropriate ESD protection should be used.
The Digilent Pmod™ Compatible headers use an SPI interface. Connection information for the Digilent
Pmod™ Compatible header is provided in
Table 5-4 and Table 5-5 below.
Please note that the connector numbering adheres to the Digilent Pmod™ standard and is different from all
other connectors on the RSK+ designs. Details can be found in the Digilent Pmod™ Interface Specification
Revision: November 20, 2011
Figure 5-1: Digilent Pmod™ Compatible Header Pin Numbering
Digilent Pmod™ Compatible Header (PMOD1) Connections
Pin Circuit Net Name
MCU
Pin Circuit Net Name
MCU
Port Pin Port Pin
1
CTS6RTS6 PJ3 13
7
IRQ8 P20 45
P45 P45 167
2 TXD6 P00 8 8 IRQ9 P21 44
3 RXD6 P01 7 9 P46 P46 166
4 SCK6 P02 6 10 P47 P47 165
5 GROUND - - 11 GROUND - -
6 Board_3V3 - - 12 Board_3V3 - -
Table 5-4: Pmod™1 Header Connections
Digilent Pmod™ Compatible Header (PMOD2) Connections
Pin Circuit Net Name
MCU
Pin Circuit Net Name
MCU
Port Pin Port Pin
1 P-CTS7RTS7 P93 159 7 IRQ10-DS P42 170
2 P-TXD7 P90 163 8 IRQ11-DS P43 169
3 P-RXD7 P92 160 9 P96 P96 152
4 P-SCK7 P91 161 10 P97 P97 149
5 GROUND - - 11 GROUND - -
6 Board_3V3 - - 12 Board_3V3 - -
Table 5-5: Pmod™2 Header Connections