Renesas PC7501, Руководство пользователя

Страница: 10 / 50

PC7501 User’s Manual 1. Precautions for Safety
R20UT0207EJ0500 Rev.5.00 Page 10 of 50
Nov 01, 2010
WARNING
Warnings for AC Power Supply:
• If the attached AC power cable does not fit the receptacle, do not alter the AC power cable and do not
plug it forcibly. Failure to comply may cause electric shock and/or fire.
• Use an AC power cable which complies with the safety standard of the country.
• Do not touch the plug of the AC power cable when your hands are wet. This may cause electric shock.
• This product is connected signal ground with frame ground. If your developing product is transformless
(not having isolation transformer of AC power), this may cause electric shock. Also, this may give an
unrepairable damage to this product and your developing one.
• While developing, connect AC power of the product to commercial power through isolation transformer
in order to avoid these dangers.
• If other equipment is connected to the same branch circuit care should be taken not to overload the
circuit. Refer to nameplate for electrical ratings.
• When installing this equipment, insure that a reliable ground connection is maintained.
• If you smell a strange odor, hear an unusual sound, or see smoke coming from this product, then
disconnect power immediately by unplugging the AC power cable from the outlet.
Do not use this as it is because of the danger of electric shock and/or fire. In this case, contact your local
distributor.
Warnings to Be Taken for This Product:
• Do not disassemble or modify this product. Personal injury due to electric shock may occur if this
product is disassembled and modified.
• Make sure nothing falls into the cooling fan on the top panel, especially liquids, metal objects, or
anything combustible.
Warning for Installation:
• Do not set this product in water or areas of high humidity. Make sure that the product does not get wet.
Spilling water or some other liquid into the product may cause unrepairable damage.
Warning for Use Environment:
• This equipment is to be used in an environment with a maximum ambient temperature of 35°C. Care
should be taken that this temperature is not exceeded.