Renesas M30800T-CPE, Руководство пользователя

Страница: 27 / 52

( 27 / 52 )
2.7 Starting Up Emulator Debugger M3T-PD308M
After checking the emulator has started up normally, start up emulator debugger M3T-PD308M.
For starting up emulator debugger M3T-PD308M, follow the steps below.
Click the start button of Windows.
And select Program (P) -> [RENESAS-TOOL] -> [PD308M V.1.10 Release 1*] -> [PD308M].
* Varies depending on the version of the emulator debugger.
2.8 Setting the Operating Environment of Emulator Debugger M3T-PD308M
After starting up M3T-PD308M, as the Init dialog box will open, set up as shown in Figure 2.13. For
details on Init dialog box, refer to user's manual of M3T-PD308M.
Figure 2.13 Setting Init dialog box
(2) Select the serial port
where the emulator
is connected.
(3) After completed the
settings, click OK
button.
(1) Click Refer button and
select the MCU file
"M30800.MCU".
The MCU file is stored
in the MCUFILES
directory under the
directory where M3T-
PD308M is installed.