Renesas M30800T-CPE, Руководство пользователя

Страница: 19 / 52

( 19 / 52 )
(2) Name of Each Part of Emulator
Figure 2.2 shows the name of each part of the emulator.
Figure 2.2 Name of each part of emulator (top view of M30800T-CPE)
(1) System status LEDs
The system status LEDs indicate the emulator main unit's power supply. Table 2.1 lists the
definition of system status LED.
Table 2.1 Definition of system status LED
(2) Target status LEDs
The target status LEDs indicate the target MCU's power supply and operating status. Table 2.2
lists the definition of each target status LED.
Table 2.2 Definition of target status LEDs
Name
POWER
CLOCK
RESET
RUN
Number
LED2
LED3
LED4
LED5
Color
Orange
Green
Red
Green
Status
ON
OFF
ON
OFF
ON
OFF
ON
OFF
Function
Power is supplied to the target MCU.
Power is not supplied to the target MCU.
BCLK is output from the target MCU.
BCLK is not output from the target MCU.
Target MCU is being reset.
Target MCU is not being reset.
User program is being executed.
User program has been halted.
Target status LEDs
LED3: Power of target system (POWER)
LED4: Oscillation of clock (CLOCK)
LED5: Reset pin of MCU (RESET)
LED6: Execution of program (RUN)
System reset switch
P8
7
/X
CIN
select switch
(Factory-setting: P87)
J2: Serial interface cable
connector
J1: Power connector
System status LEDs
LED1: Power of emulator
(POWER)
LED2: Starting-up of emulator
(SAFE)
JP2: MCU power voltage select jumper
(Fixed to 5.0 V)
JP1: MCU power supply select jumper
(Factory-setting: INT)
Name
POWER
SAFE
Number
LED1
LED2
Color
Orange
Green
Status
ON
OFF
ON
OFF
Function
Power is supplied to the emulator.
Power is not supplied to the emulator.
Emulator started up normally.
Emulator did not start up normally.