Renesas H8 Series, Руководство пользователя

Страница: 130 / 272

108
5.9 Analyzing Performance
Use the performance analysis function to measure the rate of execution time. The performance analysis function
does not affect the realtime operation because it measures the rate of execution time in the specified range by
using the circuit for measurement of hardware performance included in the emulator.
Select either of the following five modes according to the purpose of measurement.
Table 5.7 Available Measurement Modes
Mode Description Purpose
Time Of Specified Range
Measurement Measures the execution time and
execution count in the specified
range. Measurement of time taken for
processing of functions except for
that required for child functions
called from the functions.
Start Point To End Point
Measurement Measures the execution time and
execution count between the
specified addresses. Measurement of time taken for
processing of functions.
Start Range To End
Range Measurement Measures the execution time
from a specified range to another
specified range. Measurement of execution time
spent from calling of any of
sequential subroutines to calling of
any of another sequential
subroutines in a program that
includes subroutines in sequence,
such as an assembly program.
Access Count Of
Specified Range
Measurement Measures the number of times a
specified range is accessed from
another specified range. Measurement of the number of
times a global variable is accessed
from a specific function.
Called Count Of
Specified Range
Measurement Measures the number of times a
specified range has called
another specified range. Measurement of the number of
times a function is called from a
specific function.
Use eight performance channels installed on the circuit for measurement of hardware performance in the
emulator for setting of conditions for measurement. Up to eight points can be set.
Note, however, that up to four points can be set in Start Range To End Range Measurement, Access Count Of
Specified Range Measurement, or Called Count Of Specified Range Measurement because two sequential points
are used for setting a condition in these modes.