Renaissance RUMFORD 1500, Руководство пользователя

Страница: 38 / 44

M
A
IN
TE
N
A
N
CE
38
There is a stainless steel gasket that seals the top of the guillotine door frame 3.
against the fireplace. It is on the back side of the top of the guillotine door frame.
This gasket will rarely need to be changed.
There is a stainless steel gasket that seals the bottom of the guillotine door frame 4.
against the hearth threshold. It is on the bottom of the guillotine door frame. The
rate of replacement will vary depending on how careful you are at keeping the hearth
threshold clean before closing the guillotine door.
The glass door can also be adjusted in the guillotine door frame in order to close
properly on the glass door gasket.
If required, the right side of the glass door can be tightened/loosened by adjusting both
pins that latch the glass door:
Remove the shoulder bolt and the bushing on the back side of the door latch; 1.
Turn the front screw counterclockwise to tighten the glass door or clockwise to 2.
loosen the door;
Reinstall the bushing and shoulder bolt. 3.
There is no need to over-tighten the glass door.
If required, the left side of the glass door can be tighten/loosen by adjusting the position
of the hinge on both the glass door and the guillotine door frame. You can adjust the
hinge to the glass door, the glass door will then move in or out with respect to the hinge
and the guillotine door frame.
Slightly loosen the screws holding the hinge to the glass door. 1.
With the door open, gently pull the glass door away from the hinge pin. This will 2.
move the glass door slightly closer to the guillotine door frame when it is closed.
Retighten all the hinge screws on the glass door. 3.
You can also adjust the hinge to the guillotine door frame, the glass door and the hinge
will then be moved in or out with respect to the guillotine door frame.
Slightly loosen the screws holding the hinge to the guillotine door frame. 4.
With the door open, gently push the glass door with the hinge towards the firebox. 5.
This will move the glass door and the hinge slightly closer to the guillotine door
frame when it is closed.
Retighten all the hinge screws on the guillotine door frame. 6.
You can also adjust the hinge on both sides to minimize the esthetic impact of the
adjustment.
While burning your fireplace with the door closed, if you see the flames coming close to
the glass, burning more on one side, or simply not burning nicely, you may need to
change one of the gaskets.