Renaissance RUMFORD 1500, Руководство пользователя

Страница: 14 / 44

IN
S
TA
LL
A
TI
O
N
14
U
NPACKING YOUR
RUMFORD 1500
WARNING: THE FIREPLACE IS FRONT HEAVY. MAKE SURE TO ALWAYS MAINTAIN
CONTACT WITH THE FIREPLACE WHEN MOVING IT TO PREVENT ANY UNDUE
TILTING.
The RUMFORD 1500 fireplace is front heavy. To safely ship and transport the RUMFORD
1500, we have taken various parts from the front of the fireplace and attach them to the
back of the crate rendering it well-balanced. As soon as you start removing heavy parts
from the back of the crate, the rest of the crate becomes unbalanced, be careful.
Furthermore, to ease the fireplace transportation, the overall size and weight of the
fireplace has been reduced by not installing various parts on the fireplace.
Two transportation blocking brackets are in place to prevent the guillotine door from
moving during shipping. Do not attempt to move the guillotine door before removing
these transportation safety devices. To remove some weight on the front of the
fireplace, the counterweights are not installed; they are attached to the back of the
crate. We recommend that you wait until the fireplace is in its final position before
removing the transportation blocking brackets and installing the counterweights. Until
you do, the guillotine door is disabled.
The fireplace crate includes all of the following:
(A)
Fireplace in transportation configuration (approximately 970 lb);
(B) Five small brackets and screws securing the fireplace to the crate: keep them, they
will be necessary for securing the fireplace to the floor;
(C) Top finishing cover;
(D) One front top finishing cover;
(E) Three black lintels wrapped in paper;
(F) Two bottom standoff supports;
(G) On bottom standoff shield;
(H) Two bigger counterweights: attached to the back vertical posts of the crate
(approximately 35 lb each);
(I) One smaller counterweight: attached to the back vertical posts of the crate
(approximately 11 lb each);
(J) A pair of Renaissance andirons;
(K) A hearth threshold in three parts;
(L) Spark guard;
(M) Six anti-tip stability brackets: attached to the top of the fireplace casing;
(N) In the manual bag (attached to the top of the fireplace casing):
•
Two counterweight blocking rods;
•
Two black round caps;
•
One bag with 24 large self-tapping
screws;
•
One bag with 21 small self-
tapping screws;
• One bag with 15 rivets; • A removable door handle;
•
Some high temperature grease;
•
A 5" external air coupling;
•
An owner's and installation manual.
These items will be referred to by the above letters throughout the installation
instructions of the fireplace itself.