RENA Address Printer
612s(Ei1)_Operations Rev: 5/12/03
7
2. System requirements
The printer is designed for use with a PC (Pentium 200 MHz) equipped
with a parallel and serial interface. It can be operated with the following
operating systems: Windows 3.x, Windows 95 / 98 / 2000 or Windows
NT4.
You will need a shielded, twisted parallel interface cable (not included
within the scope of delivery).
3. Transport and packaging
3.1 Transport
The address printer is dispatched in appropriate packaging so that it
reaches its destination without damage via a regular mode of transport.
The carrier is liable for any damage during transport. Transport
and storage should take place under normal conditions, i.e. at
temperatures b5°C and +70°C and relative air humidity
of up to 80%. Impermissible conditions may lead to damage which
is not externally visible.
3.2 Unpacking the printer
Remove all packaging and take out the printer with its accessories.
Use the following list to check that all parts of the printer are present and
undamaged:
•
1 printer
•
1 power cable (option)
•
2 contact brackets, short
•
1 guide bar
•
1 printer driver (installation guide and floppy disk or CD)
In the event that the AF635 needs to be returned, the original packaging
must be used. We strongly suggest that you keep the original packaging
for future use.
If you do not wish to use the packaging later, e.g. for returning the printer
for repair, be sure to dispose of it in an environmentally appropriate way.
F
F
