RENA Address Printer
612s(Ei1)_Operations Rev: 5/12/03
24
Print test
•
Insert a sheet of paper.
•
Switch to
off-line
mode
.
•
Press the
test
key.
A print test is now carried out.
TIP!
If the printer feeds very slowly, you may have forgoten to set and
“local lock“ the paper size.
5.10 Resetting the address printer
With loss of configuration
The following procedure resets the printer. All values and configurations
which have been changed are reset to the works settings:
•
Switch the printer off.
•
Keep the
prog
key pressed and switch the printer on again.
The display shows the procedure:
Without loss of configuration
In this procedure, the works setting is simply selected. It is stored in
Setting No.0 where it cannot be changed. This is done in programming
mode as follows:
•
Switch the printer to off-line mode.
•
Press the
prog
key twice.
•
Use the
prev
or
next
key until No.0 appears in the display.
•
Press the
prog
key again.
The
end
key terminates programming mode, the works setting has been
selected.
DA612S Inkjet
Default Reset
