REMS Pull L, Инструкция по эксплуатации, Страница: 10 / 148

Translation of the Original Instruction Manual
Fig. 1.1. – 4.3.
1 Tank
2 Vacuum cleaner top part
3 Lock vacuum cleaner top part
4 Handle
5 Castor/castor with brake
6 Holder for vacuum cleaner
attachment wet/dry
7 Wheel
8 Suction power switch
9 Filter cover
10 Flat folded fi lter
11 Plug for suction hose connecting
nozzle (only Pull M)
12 Suction hose connecting nozzle
13 Suction hose
14 Suction hose diameter selector
switch (only Pull M)
15 Adapter suction hose/power tool
16 Socket for power tool with
automatic on/off
17 Handle
18 Joint cleaner attachment wet/dry
19 Suction tube
20 Cleaner attachment for surfaces
wet/dry 300 mm
21 On/off switch
22 Power tool control lamp
23 Automatic fi lter cleaning switch
24 Electrodes for fi lling level limiting
25 Holder for joint attachment wet/dry,
handle, suction tube, adapter
suction hose/power tool
26 Air outlet
27 Air inlet motor cooling
28 Holder for connecting cable and
suction hose
General power tool safety warnings
WARNING WARNING
Read all safety warnings, instructions, illustrations and specifi cations provided
with this power tool. Failure to follow all instructions listed below may result in
electric shock, fi re and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-operated (corded) power
tool or battery-operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the pres-
ence of fl ammable liquids, gases or dust. Power tools create sparks which
may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool. Distrac-
tions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never modify the plug in any way.
Do not use any adapter plugs with earthed (grounded) power tools. Unmodi-
fi ed plugs and matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces, such as pipes,
radiators, ranges and refrigerators. There is an increased risk of electric shock
if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a power
tool will increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or unplug-
ging the power tool. Keep cord away from heat, oil, sharp edges or moving
parts. Damaged or entangled cords increase the risk of electric shock.
e) When operating a power tool outdoors, use an extension cord suitable for
outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric
shock.
f) If operating a power tool in a damp location is unavoidable, use a residual
current device (RCD) protected supply. Use of an RCD reduces the risk of
electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use common sense when oper-
ating a power tool. Do not use a power tool while you are tired or under
the infl uence of drugs, alcohol or medication. A moment of inattention while
operating power tools may result in serious personal injury.
b) Use personal protective equipment. Always wear eye protection. Protec-
tive equipment such as a dust mask, non-skid safety shoes, hard hat or hearing
protection used for appropriate conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch is in the off-position before
connecting to power source and/or battery pack, picking up or carrying the
tool. Carrying power tools with your fi nger on the switch or energising power
tools that have the switch on invites accidents.
d) Remove any adjusting key or wrench before turning the power tool on. A
wrench or a key left attached to a rotating part of the power tool may result in
personal injury.
e) Do not overreach. Keep proper footing and balance at all times. This enables
better control of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair and
clothing away from moving parts. Loose clothes, jewellery or long hair can be
caught in moving parts.
g) If devices are provided for the connection of dust extraction and collec-
tion facilities, ensure these are connected and properly used. Use of dust
collection can reduce dust-related hazards.
h) Do not let familiarity gained from frequent use of tools allow you to become
complacent and ignore tool safety principles. A careless action can cause
severe injury within a fraction of a second.
4) Power tool use and care
a) Do not force the power tool. Use the correct power tool for your application.
The correct power tool will do the job better and safer at the rate for which it was
designed.
b) Do not use the power tool if the switch does not turn it on and off. Any power
tool that cannot be controlled with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/or remove the battery pack,
if detachable, from the power tool before making any adjustments, changing
accessories, or storing power tools. Such preventive safety measures reduce
the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power
tool. Power tools are dangerous in the hands of untrained users.
e) Maintain power tools and accessories. Check for misalignment or binding
of moving parts, breakage of parts and any other condition that may affect
the power tool’s operation. If damaged, have the power tool repaired before
use. Many accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with
sharp cutting edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work to be
performed. Use of the power tool for operations different from those intended
could result in a hazardous situation.
h) Keep handles and grasping surfaces dry, clean and free from oil and grease.
Slippery handles and grasping surfaces do not allow for safe handling and control
of the tool in unexpected situations.
5) Service
a) Have your power tool serviced by a qualifi ed repair person using only
identical replacement parts. This will ensure that the safety of the power tool
is maintained.
Safety instructions for dry and wet vacuum cleaner,
deduster
WARNING WARNING
Read all safety warnings and all instructions. Failure to follow the warnings and
instructions may result in electric shock, fi re and/or serious injury.
Save all warnings and instructions for future reference.
a) Never suck up materials containing asbestos. Asbestos is known to cause
cancer.
b) Suck up only materials which are approved for the electrical device. The
materials could cause cancer.
c) Only use the electrical device when you are totally familiar with all its functions
and are able to use it without restrictions or have received the appropriate
instruction. Careful instruction reduces operating errors and injuries.
d) The electrical device may not be used by persons (including children) with
physical, sensorial or mental disabilities or lack of experience and knowl-
edge. Children must be supervised to ensure that they do not play with the
electrical device. Otherwise there is a risk of operating errors and injuries.
e) Do not suck up infl ammable or explosive liquids, for example petrol, oil,
alcohol, solvent, with the electrical device. Do not suck up hot or burning
dusts. Do not operate the electrical device in rooms where there is a risk
of explosion. The dusts, fumes or liquids can ignite or explode.
f) The electrical device is suitable for sucking up dry materials and, by suitable
measures, also for sucking up liquids. Penetration of water into the electrical
device increases the risk of electric shock.
g) Switch off the electrical device immediately if dust escapes (e.g. fi lter
rupture). The fault must be repaired before restarting.
h) Switch off the electrical device immediately if foam or liquid escapes. Clean
the fi lling level limiting device regularly and inspect for signs of damage.
i) If use of the electrical device in a wet environment is unavoidable, use a
fault current circuit breaker. The use of a fault current circuit breaker reduces
the risk of electric shock.
j) Connect the electrical device to a properly earthed electricity mains. The
socket and extension cable must have a fully functional protective earth.
k) Do not use the electrical device with damaged cables, plugs or switches.
Do not touch damaged cables, plugs or switches and pull out the mains
plug if the cable, plug or switch is damaged during work. Damaged cables,
plugs or switches increase the risk of electric shock.
l) Do not drive over or crush the cables. Do not tug the cable to pull the plug
out of the socket or move the electrical device. Damaged cables increase
the risk of electric shock.
m) Pull the plug out of the socket before making device settings, changing
accessories or putting the electrical device away. This safety precaution
prevents unintentional starting of the electrical device.
n) Make sure that the work place is well lit.
o) Do not let children use the electrical device unsupervised. Children could
injure themselves.
p) Have the electrical device repaired only by qualifi ed technical personnel
and only with genuine spare parts. This ensures that the safety of the electrical
device is maintained.
q) The electrical device contains dust which is harmful to the health. Have
emptying and maintenance procedures, including the disposal of the dust
collection tank, carried out by specialists only. Appropriate protective
equipment is necessary. Do not operate the vacuum cleaner without the
complete fi lter system. You could otherwise endanger your health.
eng eng
10