G3-8 MA FM 1208 - R06
8
Aircraft Ground Handling and Servicing
Aircraft Ground Handling and Servicing 8 - 8
Installing the horizontal tail
1. Hold the horizontal tail in place so that the bushings in the
fuselage match up with those in the horizontal tail.
2. Apply the attachment bolts from left to right into their bushings.
The forward bolt is marked by a "V", the rearward bolt by "H".
3. Align the hole of the attachment bolt with the one in the right
bushing and secure the bolts with Fokker needles.
4.
Connect the cable plug for the electric trim actuator
5.
The pushrod quick fasteners MUST be connected properly and
secured.
Insecure connection, improper operation of control surfaces
or insecurely locked fasteners will lead to loss of control of
the aircraft!! When in doubt contact your local REMOS
dealer or service center.
6. Attach the tail cover and secure it with the screws provided.
Connect the electric jack for the taillight.
After rigging the aircraft perform a preflight check.
8.8
Folding a Rigged Aircraft
To disassemble the aircraft, perform the above described procedures
in reverse order
.
Содержание GX eLITE
