7
3-5-4. Press 1st button of the duplicate,
HCD900 starts to check the
contrast, and then shows the
similarity percentage.(Fig. 23)
Fig. 23 3-5-5. Follow steps 3-5-2, 3-5-3 &3-5-4 to
verify other buttons.
3-5-6.
To identify whether the remote control is fixed code or hopping code
, press
1st button of the remote control. (Fig. 21)
3-5-7. The LCD appears
“Processing” and goes to Fig. 22.
3-5-8. Press same button again. HCD900 starts to check the contrast, and then
shows the similarity percentage.(Fig. 23)
3-5-9. Hopping code remote control will result 0.0 percent matched.
Caution: The qualified duplication requires at least 90% similarity.
3-6 Make Hopping:
Create a duplicate without the existing of original rolling code
remote control. (This function can only be used to create original
remotes with
HCSxxx
format of IC and the original remotes
without seed cod
e)
3-6-1. Press
and to choose the
brand what you would like to
clone. (Fig. 24)
Fig. 24
3-6-2. Press
to enter the Reference
Number Setting.
Press
and
to set up the
reference number. (Only need to
set up for certain brands) (Fig. 25)
Fig. 25
3-6-3. Press
Confirm
to enter the
Serial Number Setting.
Press
and
to set up the
serial number. (Fig. 26)
Code Checking
Please Enter 1st Code
99.2
Percent Matched
Press cancel To Exit
Make Hopping
FADIN 00
Make Hopping
FADIN 0
1
Make Hopping
Serial Number Setting
000000
1
FADIN 0
1
