Remocon HCD900, Инструкции по эксплуатации

Страница: 5 / 8

5
3-3-2. Place the original remote control
on the
Test Area
of HCD900.
3-3-3. Press and holding 1
st
button of
original remote control, LCD
displays a serial number(Fig. 14).
Each remote control has its own
series number.
Fig. 14
3-3-4 Press and holding 1
st
button of
original remote control again. The
LCD displays as Fig. 15.
Fig. 15
3-3-5. Press
Confirm ,
the LCD displays as
Fig. 16. Now the 1
st
button has been
stored successfully
fig.16
3-3-6. Press and holding 2nd button of original
remote control, LCD displays as (Fig. 17)
3-3-7. Repeat step 3-3-6. to store other keys
of original remote control.
Fig. 17
3-3-8. Connect the H series REMOCON
remote control & HCD900 by using
attached cable.
3-3-9. Press
Confirm
to program the
code into REMOCON remote control.
3-3-9. LCD displays duplicating result as
Programming Success or
Programming Failure .
(Fig. 18)
Fig. 18
HoppingCode Duplicate
1 2 3 4 5 6 7 8 9 10
10 key spaces remain
Microchip HC5300
2 A72282F 24DC5718
Please enter 2nd code
HoppingCode Duplicate
1 2 3 4 5 6 7 8 9 10
10 key spaces remain
Serial Number Setting
002229 3
HoppingCode Duplicate
1 2 3 4 5 6 7 8 9 10
1
9 key spaces remain
Please enter 1st code
HoppingCode Duplicate
1 2 3 4 5 6 7 8 9 10
1 1
8 key spaces remain
Please enter 1st code
HoppingCode Duplicate
1 2 3 4 5 6 7 8 9 10
1 1
8 key spaces remain
Programming success
Please enter 1st code