6
3-4. REMOCON Read Back (For FixedCode)
3-4-1 Func.: To read the code from REMOCON remote control, and reduplicate the code
into other REMOCON remote controls.
3-4-2. Be sure to connect REMOCON
remote control(existing code) to
HCD900 by using attached cable
before
entering
“REMOCON
Read Back
” mode. (Fig. 19)
Fig. 19
3-4-3. Move highlight to
“REMOCON
Read Back
” mode, press
Confirm
to start reading. The LCD displays
as Fig. 20.
Fig. 20
3-4-4. Replace the remote control by new REMOCON remote control and touch
Confirm
. LCD displays duplication result as
Programming Success
or
Programming
Failure.
3-5. Code Checking
(Fig. 21)
3-5-1. Func.: There are 2 functions in
this mode: First is to verify
whether the duplication has
been done successfully or not;
Second is to identify your
existing remote control is fixed
code or hopping code.
Fig. 21
3-5-2.
To verify if the duplication has
been done successfully
, press
1
st
button of original remote
control till beep.
3-5-3 The LCD appears
“Processing”
and goes to Fig. 22.
Fig. 22
MAIN MENU
Frequency Meter
FixedCode Duplicate
HoppingCode Duplicate
REMOCON Read Back
Code Checking
Remote Report
FixedCode Duplicate
1 2 3 4
5
6 7 8 9 10
1 1 1 1
6 key spaces remain
Ready
Code Checking
Please Enter 1st Code
Press cancel To Exit
Code Checking
Please Enter 2nd Code
Press cancel To Exit
