3
3-2. Fixed Code Duplicate:
No.1 to No. 5 are for frequency band 1, and No. 6 to
No.10 are for frequency band 2(dual frequency). (Fig. 5)
3-2-1. Func.: Read and duplicate fixed
code from original remote control
into REMOCON remote control. It
provides 10 key spaces.(Fig. 5)
3-2-2. Places original transmitter on the
Test Area
of HCD900.
Fig. 5
3-2-3. Press and holding 1
st
button of
original
remote
control,
LCD
displays
“Processing”. Releases
the button when beep. Now the
frequency of original remote is
shown above the number 1, and
the code of the 1
st
button of original
remote
has
been
read
successfully.(Fig. 6)
Fig. 6
3-2-4. Repeat step 3-2-3. until all keys of
original remote control have been
read by HCD900.(Fig. 7)
[Note:
for
dual
frequency
remotes
RMC-552, RMC-556 & RMC-558: No.1 to
No. 5 are for buttons 1 to 5 when the
switch position is
“Up”, and No. 6 to No. 10
are for buttons 1 to 5 when the switch
position is
“Down”; for RMC-558C:
opposite to above]
Fig. 7
3-2-5 (Only for dual frequency remote)
After all keys of 2 remotes with
different frequencies has been read
by HCD-900, press & to move
highlight to No.1 ~ No.5 and No.6 ~
No.10 to choose the right frequency
channels on REMOCON remote by
pressing & .(Fig.8)
Fig. 8
3-2-6. Press
Confirm
to enter duplicating
mode, the LCD displays as (Fig. 9)
FixedCode Duplicate
1
2 3 4 5 6 7 8 9 10
10 key spaces remain
Ready
FixedCode Duplicate
433.9
1
2
3 4 5 6 7 8 9 10
1
9 key spaces remain
Ready
FixedCode Duplicate
433.9
1 2 3 4
5
6 7 8 9 10
1 1 1 1
6 key spaces remain
Ready
FixedCode Duplicate
433.9
1 2 3 4 5 6 7 8 9 10
1 1 1 1 2 2 2 2
6 key spaces remain
Ready
