3
Operation
3.1 General operation
The REMKO Smart Control Touch regulation is an
operating module with touch display. No buttons
are required to adjust and change parameters.
Instead, this takes place by touching the surface of
the controller at the appropriate points.
1
2
3
4
Fig. 3: Basic controls
The control panels for the four basic controls are
always displayed at the bottom of the screen. This
enables fast and intuitive navigation through the
basic menus.
1
Overview
Fig. 4: Overview
The overview display shows information such as
the date and time, the current outside temperature
and weather information. The higher-level room cli-
mate mode can also be viewed and changed here.
2
Information
Fig. 5: Information
In the information menu, information such as
actual room temperature, operating mode, com-
pressor start and run times and current error mes-
sages can be called up in the individual submenus.
REMKO Smart-Control Touch
8
