After the unit has been successfully added, the
Unit overview can be selected and accessed from
the drop-down menu by pressing the menu button
in the upper left corner of the screen.
(EN: Operator: PM air-conditioning)
(EN: Add unit)
Fig. 16: Unit overview
In the Unit overview, all Smart Control Touch units
linked to the account are listed. The following func-
tions can be used from here:
1
Remote control
By pressing this button, the user interface of the
selected Smart Control Touch controller can be
mirrored to the terminal device. This allows all
functions to be used that are also directly available
on the control unit.
2
User
In this window, additional users can be added to
operate the controller and access to the REMKO
service (limited to 1 hour) can be granted.
3
Editing a unit
Here, it is possible to edit the data that was input
when adding the device.
4
Deleting a unit
Under this item the selected unit can be deleted
from the account.
4
Assembly and
installation
Surface-mounted installation
The surface-mounted installation can be carried
out as follows:
1.
Pull through the aluminium frame fixed by
magnets and remove from the housing.
2.
Release the grey lever of the terminal block
at the back of the touch display by pulling it
up and remove the ribbon cable.
REMKO Smart-Control Touch
14
